How-to guides

STEPS TO FIT YOUR PLATES FORM extender plates replace the stock Speedplay base plates supplied with your cleats. You will need to reuse the blue stock wedges from the original...

OVERVIEW The forefoot wedge should be fitted inside the shoe, between the insole and the shoe itself. The wedge is designed to be used in the varus orientation (thick side...

INSTRUCTIONS TO FIT Break shim into component parts and rebuild as required. Decide which set of bolt holes on your shoes (front or rear) you’ll be using for your cleat...

OVERVIEW The wedge is designed to be just three quarters the width of a standard MTB cleat. This means that part of the cleat will contact the shoe itself when...

OVERVIEW The 3-hole universal leg length shim is compatible with all 3-hole road cleat systems. They are available in both 2mm and 3mm variants so can be stacked in 1mm...

OVERVIEW The XPR and XPS plates offer both rearward and medial/lateral adjustment. Before you start you will need to establish which medial/lateral orientation you want them to be fitted. The...